The Official Online Weekly Newspaper of NAHB
The 90-day phase-in period giving residential construction companies additional time to come into compliance with the Occupational Safety and Health Administration’s new “Compliance Guidance for Residential Construction” directive (STD 03-11-002) on fall protection ends on Sept. 15.
Builders must take whatever steps are needed to be in compliance with OSHA’s Subpart M-Fall Protection beginning on Sept. 16.
Employers are being required to provide conventional fall protection systems — guardrails, personal fall arrest systems or safety nets — when workers are exposed to falls six feet or more above a lower level.
There is an exception if an employer determines that using conventional fall protection is either infeasible or creates a greater hazard. In that case, the employer can implement alternative fall protection practices and must provide a written fall protection plan.
OSHA is presuming that conventional fall protection systems can be used for most tasks, putting the burden on the employer to demonstrate otherwise.
Many states operate their own state occupational safety and health plans and may have adopted fall protection standards that are different from those set at the federal level.
Builders who work in states with an approved occupational safety and health plan should contact their local administrator or home builders association for further information on the standards that apply.
The video provides an overview of the key safety issues that residential builders and workers need to focus on to reduce accidents and injuries.
Based on the NAHB-OSHA Jobsite Safety Handbook, this DVD is intended to be used as part of an essential residential construction safety-training program and includes two 20-minute videos on one DVD.
To view or purchase this DVD online, click here, or call 800-223-2665.